bmv Burkard Metallpulververtrieb GmbH · Ernst-August-Straße. 20 · 49186 Bad Iburg · info@bmv-burkard.com · www.bmv-burkard.com

Our Products

Our Target Markets

Our Quality

Our Know-how

 
Quality Manufacturer

 

ATM

Established by the Central Iron & Steel Research Institute (CISRI), ATM underwent a successful IPO on the Shenzhen Stock Exchange in 2000. ATM has been engaged in atomized powders for almost 50 years and provides the full range of powder manufacturing technology from open air and vacuum gas atomization to conventional water- and high pressure water atomization. The latter one is particularly suitable for making extra fine powders with high sinter activities in large volumes.

The scope of powders covers Fe-, Ni- and Co-base alloys. The powder manufacturing plant was completely relocated at their site in HeBei BaZhou, approx. 120 km south of Beijing. In the new plant ATM operates 6 water atomisatzion units with a capacity of more than 2.000 tons and 8 gas atomisation towers for more than 5.000 tons.

ATM is certified according to ISO 9001, 14001, 18001 as well as GB/T 28001.

Hilderbrand & Cie Sa

Hilderbrand & Cie SA is head-quartered in Thônex just outside Geneva/Switzerland and has produced precious metal powders by gas atomization for over 20 years. Until 1999, these powders were exclusively applied for Hilderbrand’s own brazing pastes. With the growing market demand for precious metal in powder form for other applications, such as Metal Injection Moulding (MIM), Thermal Spraying, Press & Sinter Technology, Rapid Tooling etc., further atomizing, classification and analytical equipment have been added over time to increase both, technical capabilities and capacities.

Hilderbrand is certified according to ISO 9002 since 1999.

In April 08, bmv became Hilderbrand’s official distributor in Germany for precious metal powders applied by MIM, Thermal Spraying, Rapid Tooling or other similar technologies.

Umicore

Located in Grenoble, the birthplace of the Powder Metallurgy in France, Umicore Specialty Powders France has been specialized in the manufacturing processes and usages of metallic powders for over 50 years.

In 2009 bmv had been appointed the exclusive agent in Germany and Austria of Umicore Specialty Powders France powder products used for Metal Injection Moulding (MIM).

Top

bmv Burkard Metallpulververtrieb GmbH · Ernst-August-Straße. 20 · 49186 Bad Iburg · info@bmv-burkard.com